FlowFilt SS Sintered Filter Cartridge

FlowFilt Stainless Steel sintered powder filter cartridges are recommended for the filtration of air or liquid at higher operating temperatures & corrosive environment. Sintered S.S. cartridges are produced by cold isostatic pressing, which gives high porosity to the material and also stability. They can easily be cleaned or back washed thus having longer shelf life. Sintered filters are able to withstand high differential pressure across the filters.

For more information, Please download our
FlowFilt SS Sintered Filter Cartridge brochure here

Features & Benefits:

High mechanical strength & good integrity.
Good corrosion and thermal resistance.
No possibility of media migration.
Good permeability.
Service life can be prolonged by cleaning and regenerating process.

Product Specifications:
Micron Rating	0.5, 1, 3, 5, 10, 25 µ
Length	100 mm to 1000 mm or as per request
Outer Dia	63 mm, other dia available on request
Inner Dia	57 mm
Wall thickness	3 mm
Max operating temperature	No constraint
Sterilization Autoclave Hot water	121˚C, 30 min, 10 times 80˚C, 30 min, 30 times
Effective surface area for sintered filter element	Approx 1000 cm2 per standard 500 mm long cartridge

Construction:

Filter media: SS 316L

End Caps: SS 316/ SS 316L

‘O’ Ring/ Gaskets: Silicone/ EPDM/ Viton

Configuration:

Double open end- DOE

Code 7S (226- double ‘O’ Ring / fin)

1″ BSP threaded, other end closed

Applications:

Gas & liquid filtration

Solid catalyst recovery

Filtration of slurry oil

Filtration of petrochemical products

High temperature gas filtration

Vent applications

Chemical reagents

Fluidization

Sparging